Prohasko Lyubov Savelevna. Hydrodynamics and calculation of cavitational mixers of continuous operation. 2000
Hydrodynamics and calculation of cavitational mixers of continuous operation: Dis.... A Cand.Tech.Sci.: 05.04.13: Chelyabinsk, 2000 146 p. RSL OD, 61:01-5/88-5
Other dissertations on discipline Hydraulic machines and Hydropneumaticunits:
- Elzarook Faradzh Ahmed. the Analysis of hydrodynamic properties and heightening of power indexes of multistage pumps of small rapidity - 2008
The analysis of hydrodynamic properties and heightening of power indexes of multistage pumps of small rapidity: the thesis... A Cand.Tech.Sci.: 05.04.13 / Elzarook Faradzh Ahmed; [a guard Place: Mosk. ehnerget. In]. Moscow, 2008.223 p.: silt. RSL OD, 61 09-5/146 - Parhimovich Aleksandr YUrevich. the Simulation modelling of temperature stratification of the twirled streams in rotational hladogeneratorah - 2008
The Simulation modelling of temperature stratification of the twirled streams in rotational hladogeneratorah: the thesis... A Cand.Tech.Sci.: 05.04.13 / Parhimovich Alexander Jurevich; [a guard Place: Ufim. gos. aviats.-tehn. Un y]. Ufa, 2008.124 p.: silt. RSL OD, 61 09-5/874
- Petrov Pavel Valerevich. the Technique of projection of hydromechanical devices with use of methods of algorithmic simulation - 2008
A technique of projection of hydromechanical devices with use of methods of algorithmic simulation: the thesis... A Cand.Tech.Sci.: 05.04.13 / Petrov Paul Valerevich; [a guard Place: Ufim. gos. aviats.-tehn. Un y]. Ufa, 2008.228 p.: silt. RSL OD, 61 09-5/440 - Din Dik Thyuy. the Analysis and optimisation of hydrodynamic indexes srednenapornoj the radial-axial hydraulic turbine of double regulation - 2007
The analysis and optimisation of hydrodynamic indexes srednenapornoj the radial-axial hydraulic turbine of double regulation: the thesis... A Cand.Tech.Sci.: 05.04.13 Moscow, 2007 209 p. RSL OD, 61:07-5/2948
- Zueva Elizaveta YUrevna. Research hydro-and thermodynamic processes of a current of a viscous fluid in slotted channels of paths of greasing and cooling of tight pump aggregates and shaping of algorithms of their calculation - 2007
Research hydro-and thermodynamic processes of a current of a viscous fluid in slotted channels of paths of greasing and cooling of tight pump aggregates and shaping of algorithms of their calculation: the thesis... A Cand.Tech.Sci.: 05.04.13 Moscow, 2007 310 p., Bibliogr.: p. 259-269 RSL OD, 61:07-5/4362 - Taha Ali Ahmad. Working out and research optimum by criterion robastnosti systems of hydraulic drives for an aviation training simulator - 2007
Working out and research optimum by criterion robastnosti systems of hydraulic drives for an aviation training simulator: the thesis... A Cand.Tech.Sci.: 05.04.13 / Taha Ali Ahmad; [a guard Place: Mosk. gos. tehn. Un y It. AD Bauman]. Moscow, 2007.156 p.: silt. RSL OD, 61 07-5/4145 - Volkov Aleksandr Viktorovich. Working out of methodology of heightening of efficiency and reliability of maintenance of the heat power pump equipment - 2006
Working out of methodology of heightening of efficiency and reliability of maintenance of the heat power pump equipment: dis.... Dr.Sci.Tech.: 05.04.13 Moscow, 2006 252 p. RSL OD, 71:07-5/134 - Arefev Konstantin Valerevich. Jet hydraulic steering cars with correction devices - 2006
Jet hydraulic steering cars with correction devices: dis.... A Cand.Tech.Sci.: 05.04.13 Ufa, 2006 166 p. RSL OD, 61:07-5/783 - Khin Maung Ey. Research and working out of the axial pump with the adjustable directing device on an impellor input - 2006
Research and working out of the axial pump with the adjustable directing device on an impellor input: the thesis... A Cand.Tech.Sci.: 05.04.13. - Moscow, 2006.111 p.: silt. RSL OD, 61 06-5/1267 - CHvyаlev Dmitriy Stanislavovich. Working out and research of an electrohydraulic watching drive for trials of armature of ferro-concrete constructions and their elements - 2006
Working out and research of an electrohydraulic watching drive for trials of armature of ferro-concrete constructions and their elements: the thesis... A Cand.Tech.Sci.: 05.04.13. - Moscow, 2006.172 p.: silt. RSL OD, 61 06-5/3796 - Solyаr Sergey Vladimirovich. Research of working process and working out of a design procedure of optimum design data of a changeover valve with a common valve on elastic podvese - 2005
Research of working process and working out of a design procedure of optimum design data of a changeover valve with a common valve on elastic podvese: Dis.... A Cand.Tech.Sci.: 05.04.13: M, 2005 198 p. RSL OD, 61:05-5/2159 - Petrov Aleksey Igorevich. Creation of the centrifugal pump of ultralow rapidity for systems of thermostabilization, Working in extreme conditions - 2005
Creation of the centrifugal pump of ultralow rapidity for the systems of thermostabilization working in extreme conditions: Dis.... A Cand.Tech.Sci.: 05.04.13 Moscow, 2005 166 p. RSL OD, 61:05-5/2963 - Pomortcev Mihail YUrevich. influence Research rN a working environment on power and cavitational properties of centrifugal pumps - 2004
Influence research rN a working environment on power and cavitational properties of centrifugal pumps: Dis.... A Cand.Tech.Sci.: 05.04.13: Moscow, 2004 132 p. RSL OD, 61:05-5/1740 - SHavlovich Zoyа Anatolevna. Perfecting of constructions and operating modes of hydraulic drives in regulating systems of hydraulic turbines - 2004
Perfecting of constructions and operating modes of hydraulic drives in regulating systems of hydraulic turbines: Dis.... A Cand.Tech.Sci.: 05.04.13: St.-Petersburg, 2004 165 p. RSL OD, 61:05-5/664 - ZHarkovskiy Aleksandr Arkadevich.
n_at The Method and results of research of mechanical losses in a reciprocating engine at use ehnergosberegajushchih engine oils - 2003
Mathematical simulation of working processes in centrifugal pumps of low and average rapidity for computer-aided design problem solving: Dis.... Dr.Sci.Tech.: 05.04.13: St.-Petersburg, 2003 568 p. RSL OD, 71:05-5/131 - YArovoy Andrey Viktorovich. the Design procedure and a justification of a choice of parametres of seals of impellors of radial-axial pumps-turbines on the basis of lowering of losses - 2003
The Design procedure and a justification of a choice of parametres of seals of impellors of radial-axial pumps-turbines on the basis of lowering of losses: Dis.... A Cand.Tech.Sci.: 05.04.13: St.-Petersburg, 2003 186 p. RSL OD, 61:04-5/257-6 - Pochernina Nadezhda Ivanovna. a turbulence Numerical modelling on characteristic conditions of currents in channels of hydrocars and gidropnevmoagregatov - 2003
A turbulence Numerical modelling on characteristic conditions of currents in channels of hydrocars and gidropnevmoagregatov: Dis.... A Cand.Tech.Sci.: 05.04.13: Moscow, 2003 193 p. RSL OD, 61:04-5/261-4 - CHumachenko Boris Nikolaevich. the Theoretical fundamentals and experimental researches for the purpose of creation of flowing parts lopastnyh the pumps ensuring a combination of high EFFICIENCY, Soaking up ability and low level of vibrations - 2002
The theoretical fundamentals and experimental researches for the purpose of creation of flowing parts lopastnyh the pumps ensuring a combination of high EFFICIENCY, soaking up ability and a low level of vibrations: Dis.... Dr.Sci.Tech.: 05.07.05, 05.04.13 Moscow, 2002 416 p. RSL OD, 71:06-5/477 - Spiridonov Evgeniy Konstantinovich. the Theoretical fundamentals of calculation and projection of zhidkostno-gas jet pumps - 1996
The theoretical fundamentals of calculation and projection of zhidkostno-gas jet pumps: Dis.... Dr.Sci.Tech.: 05.04.13 Chelyabinsk, 1996 292 p. RSL OD, 71:97-5/315-0 - Levshin Vladimir Petrovich. Research of hydrodynamics of a current of a working body in the one-ring automatic valve of the piston compressor - 0000
Research of hydrodynamics of a current of a working body in the one-ring automatic valve of the piston compressor: silt RSL of OD 61:85-5/4650
-
Acoustic devices and systems -
Aerials, OHF devices and their technologies -
Aerodynamics and processes of heat exchange of flying machines -
Automation and management of technological processes and manufactures (on branches) -
Aviation and space-rocket technics -
Bases and the bases, underground constructions -
Biotechnology of foodstuff (on branches) -
Building -
Building designs, buildings and constructions -
Building materials and products -
Building mechanics -
Cars, motor industry -
Chemical technology of fuel and high-energy substances -
Chemistry technology -
Computer science, computer facilities and management -
Computers and systems -
Control and test of flying machines and their systems -
Designing and a design of courts -
Designing and building of roads, undergrounds, airdromes, bridges and transport tunnels -
Designing, a design and manufacture of flying machines -
Devices and a quality monitoring of an environment, substances, materials and products -
Devices and measurement methods by kinds of measurements -
Devices and methods for measurement of an ionising radiation and x-ray devices -
Devices and methods of transformation of images and a sound -
Devices, systems and products of medical appointment -
Document-knowledge, архив-knowledge -
Documentary information -
Durability and thermal modes of flying machines -
Dynamics, ballistics, traffic control of flying machines -
Electrical engineer -
Electromecanics and electric devices -
Electronics -
Electrotechnical complexes and systems -
Electrotechnical materials and products -
Electrotechnologies and an electric equipment in agriculture -
Electrotechnology -
Elements and devices of computer facilities and control systems -
Energy devices on the basis of renewed kinds of energy -
Engineering geometry and computer drawing -
Engineering geometry and computer drawing -
Engineering technology -
Fire and industrial safety (on branches) -
Foundry manufacture -
Friction and deterioration in machines -
Goodsknowing foodstuff and technology of products of public catering -
Goodsknowing the industrial goods and light industry raw materials -
Heat supply, ventilation, an air conditioning, gas supply and illumination -
Hromatogrophy and Hromatogrophyses devices -
Hydraulic engineering building -
Hydraulic machines and Hydropneumaticunits -
Hydraulics and an engineering hydrology -
Industrial fishery -
Industrial power system -
Information systems and processes, legal aspects of computer science -
Information-measuring and operating systems (on branches) -
Instrument making, metrology both information-measuring devices and systems -
Knowing machines, systems of drives and a detail of machines -
Labour safety (on branches) -
Land complexes, the starting equipment, operation of flying machines -
Library science and bibliology -
Light engineering -
Machines and devices, processes of refrigerating and cryogenic technics, central airs and life-support -
Machines, units and processes (on branches) -
Management in social and economic systems -
Management of processes of transportations -
Manufacture Organization (on branches) -
Materials Science -
Materials technology (on branches) -
Materials technology of manufactures textile and light industry -
Mathematical and software of computers, complexes and computer networks -
Mathematical modelling, numerical methods and complexes of programs -
Mechanical engineering and knowing machines -
Membranes and membraneses technology -
Metallurgical science and thermal processing of metals -
Metallurgy -
Metallurgy of black, colour and rare metals -
Metallurgy of technogenic and secondary resources -
Methods and systems of protection of the information, информационня safety -
Metrology and metrological maintenance -
Motor transport Operation -
Mountain machines -
Navigation and an air traffic control -
Navigation Devices -
Nuclear and radiating safety -
Nuclear power installations, including designing, operation and a conclusion from operation -
Nuclear reactor building, machines, units and technology of materials of the nuclear industry -
Operation of air transport -
Optical both optiko-electronic devices and complexes -
Physical fields of the ship, ocean, atmosphere and their interaction -
Powder metallurgy and composite materials -
Power -
Power electronics -
Power plants and power systems -
Power systems and complexes -
Power, metallurgical and chemical mechanical engineering -
Processes and devices of chemical technologies -
Processes and devices of food manufactures -
Processes and machines of agroengineering systems -
Processing of constructional materials in mechanical engineering -
Processing of metals by pressure -
Quality monitoring and diagnostics in mechanical engineering -
Quantum electronics -
Radar-location and radio navigation -
Radio engineering and communication -
Radio engineering, including systems and TV devices -
Radio measuring devices -
Road, building and hoisting-and-transport machines -
Robots, mechatroniks and roboticses systems -
Rolling stock of railways, draught of trains and electrician -
Safety in extreme situations (on branches) -
Safety of activity of the person -
Sailing charter Operation, navigation -
Ship power installations and their elements (main and auxiliary) -
Shipbuilding -
Solid-state electronics, radio-electronic components, micro-and наноэлектроника on quantum effects -
Standardization and product quality control -
System analysis, management and information processing (on branches) -
Systems of automation of designing (on branches) -
Systems, networks and devices of telecommunications -
Technical aesthetics and design -
Technical science -
Technics of high pressure -
Technologies and machines of processing by pressure -
Technologies and machines Weldining manufactures -
Technologies and maintenance service means in agriculture -
Technologies and means of mechanisation of agriculture -
Technology and building organisation -
Technology and equipment for manufacture of semiconductors, materials and devices of electronic technics -
Technology and a preprocessing of textile materials and raw materials -
Technology and machines of timber cuttings and a forestry -
Technology and processing of polymers and composites -
Technology and the equipment of chemical processing of a biomass of a tree; wood chemistry -
Technology and the equipment of mechanical and physicotechnical processing -
Technology of a skin and fur -
Technology of electrochemical processes and protection against corrosion -
Technology of fats, essence and perfumery-cosmetic products -
Technology of food products -
Technology of garments -
Technology of inorganic substances -
Technology of instrument making -
Technology of materials and products textile and light industry -
Technology of meat, dairy and fish products and refrigerating manufactures -
Technology of mechanical engineering -
Technology of organic substances -
Technology of processing, storage and processing of cereal, bean cultures, groats products, fruits-vegetables production and wine growing -
Technology of rare, absent-minded and radioactive elements -
Technology of shipbuilding, ship repair and organisation of ship-building manufacture -
Technology of shoe and kozhevenno-notions products -
Technology of silicate and refractory nonmetallic materials -
Technology of sugar and sugary products -
Technology of tea, tobacco and biologically active substances and subtropical cultures -
Technology, machines and the equipment of timber cuttings, a forestry, tree-processings and chemical processing of a biomass of a tree -
Telecommunication systems and computer networks -
Theoretical bases of computer science -
Theoretical the electrical engineer -
Theory of mechanisms and machines -
Theory of the ship and building mechanics -
Thermal engines -
Thermal power plants, their power systems and units -
Thermal, electrorocket engines and energydevice flying machines -
Track, research and designing of railways -
Transport -
Transport and transportno-technological systems of the country, its regions and cities, manufacture organisation on transport -
Transport, mountain and building mechanical engineering -
Turbomachines and combined turbounits -
Vacuum and plasma electronics -
Vacuum, compressor technics and pneumatic systems -
Water supply, water drain, building systems of protection of water resources -
Waterways of the message and hydrography -
Wheel and tracklaying vehicles -
Wood-knowledge, technology and the equipment tree-processings -
-
Agricultural sciences -
Architecture and construction -
Art criticism -
Biological sciences -
Chemical sciences -
Cultural science -
Economic sciences -
Engineering science -
Geographical sciences -
Geologo-mineralogical sciences -
Historical sciences -
Jurisprudence -
Management, marketing -
Medical sciences -
Military science -
Pedagogical sciences -
Pharmaceutical sciences -
Philological sciences -
Philosophical sciences -
Physics and mathematics -
Political sciences -
Psychological sciences -
Sciences about the Earth -
Sociological sciences -
Veterinary sciences -